• Included with Pro-Max / Max 3 or 4
• Heat Resistant Outer material is softer on paint and more durable than fiberglass.
• Reversible Velcro Hand Strap doubles the life expectancy of this attachment. Use both sides!
• Flat / flexible work coil to meet the different contours on sheet metal.
• Uses: Moldings, Stripes, Graphics, Vapor Barriers, Sound pads, nameplates / emblems, Stress relieving sheet metal…etc
• All Inductor attachments are warrantied.

·        Included with Pro-Max 3 or 4 

       High mount, molded in strain relief, keeps cord from interfering with adjacent panels.

·         Ergonomic Gripping for better control.

·         Beveled edges at base places the magnetic field in closer to the pinch weld on wider glass moldings.

·         Contour design fits neatly into the floor ribs of pick ups for removing spray-on bed liners.

·         Uses: Glass, Appliqué’s, Bonded SMC panels, Metal Bond adhesives, Spray-on Bed liners…etc

       Includes warranty

• Included with Pro-Max 3 or 4
• Tapered Body, Beveled edges and compact design allows this attachment to get into tighter areas.
• Turns bolts Red Hot (1400°) in seconds.
• Remove Seam Sealers in a fraction of the time without the expense or mess.
• Remove Hail Dents (No special attachment needed)
• Uses: Release Seized hardware, Thread Lock Compounds, caulking, soft dents, metal shrinking …etc
• All Inductor attachments are warrantied.

• Included in Pro-Max 4 / Max 4
• Beveled Edges allow greater versatility in obstructed areas.
• Heats ¼” steel, Red Hot (1400°) in seconds.
• Heats Aluminum
• Air cooled for long term use
• Uses: Aluminum; Graphic / Adhesive Removal ,  Stress Relieving / Annealing
• Steel; Frames, Stress Relieving, Metal Bond Adhesives, Fabricating…etc
• All Inductor attachments are warrantied.

Original Inductor Glass Blaster attachment.Included with the Inductor Max 3 or 4 and is hardwired to the Inductor Glass Blaster Kit PN# GB 20001.

Can also be used with the Inductor Pro-Max. Same Uses as the Inductor U series Glass Blaster attachment PN# U-311

Includes warranty

Original Concentrator attachment.

Included with Inductor Max 3 and 4

Uses same as U series Concentrator PN# U-411

Warranty included

Silica tape pads used on the Concentrator or Glass Blaster attachments, helps protect the magnet surface from possible heat damage. Also used on the Glass Blaster attachments for removing windows, non marring. (1”x1 ½”, strip of 10 pcs.)

The INDUCTOR® U-555™, an optional apparatus for the INDUCTOR® PRO-MAX™ / MAX™ systems features all the benefits of the MINI-DUCTOR (II), allowing the user to utilize all the MINI-DUCTOR (II)™ attachments with Inductors’ larger equipment. The U-555 features an ergonomically slip resistant hand grenade style grip and a Super Bright LED to illuminate the work load. Uses High Frequency Magnetic Fields to instantly heat metallic objects; Nuts/Bolts, Bearings, Gears, Pulleys, 0² Sensors...etc...

Operates on the Inductor® ProMax™ or Max™ power inverters, offering more power, speed and versatility. Complete with three attachments; 1-MD 99-601 (preformed Nutz-Off coil), 1-MD 99602 (U-form coil), and 1-MD 99-603 (Bearing Buddy). (coils are considered consumables) (custom coils made to order)

The Mini-Ductor Coil Kit is an accesory for Mini-Ductor, the New! Mini-Ductor II and the all New! Inductor U-555. The kit enables the user to heat and release siezed nuts & bolts up to 1 1/2" in dia. and other metallic hardware from corrosion and / or thread lock compounds.