Inductor^® ALFe^® Series Models

The Inductor® ALFe® series features our highest-powered units available. The ALFe® induction heating units are ideal for repair shops that require high-end heat levels to release seized parts and panel bond adhesives from steel or automotive-grade aluminum. Utilize the ALFe® series for fabricating and pre-weld heating on heavy metals. Learn more about the different models and accessories for the ALFe® series below to decide which one best fits your shop’s needs.

Inductor^® ALFe^® Series Models

Inductor ALFe® Series Attachments

ALFe® Series Induction Heaters Ordering Information

Orders are handled from 9 a.m. to 4 p.m. (CST/CDT) Monday through Friday. The shipping times in the United States is typically three to five business days. All major credit cards are accepted. Customers are responsible for paying customs and taxes if they purchase from outside of the United States.

See our Support page for our Troubleshooting Guide and Frequently Asked Questions if you’re having issues with your Induction Innovations® product. If you still can’t figure it out, give our customer service department a call at (877) 688-9633 or locally at (847) 836-6933, Monday through Friday, from 8 a.m. to 4 p.m. CST/CDT

ALFe® Series FAQs

Q: Can the Inductor harm a car’s computer?

A: Your car’s computer is encased in a metal box, this protects the electronics from the magnetic field. Once the magnetic field hits the outer surface of the metal it stops there, the field does not go through the metal. The effective magnetic field of any of the attachments at best is approximately 2.5″. Between these two factors, computers are pretty well protected.

Q: What is the benefit of using the Inductor Glass Blaster over traditional glass removal techniques?

A: 1) Traditional glass removal techniques like glass knives, vibrating knives, or piano wire pose problems of collateral damage. One slip with a vibrating knife and you can scratch the paint, cut the encapsulation, scratch the black masking, or even worse break the window. The Inductor releases the adhesive bond of the urethane at the pinch weld, eliminating the possibility of collateral damage.

2) Glass knives also have consumable blades that need to be replaced often. The Inductor Glass Blaster has no consumable parts.

3) Traditional techniques require the technician to remove the interior trim panel. The Inductor removes the window from the exterior of the car with little to no need to pull back the trim.

4)  Many of today’s modern vehicle windows are made with deep pockets and curves that knives cannot reach, lips that don’t allow blades to be inserted, or areas near impossible to get near without collateral damage. The Inductor allows the user to hurdle over all these complications with ease.

Q: Can the Inductor break glass?

A: The Inductor only heats metal. Therefore, when used according to the instruction manual it can not break the glass.

Q: Can it damage the E-coat?

A: If you follow the instructions and proper use for the Inductor you will not damage the e-coat. Overheating to a temperature that can damage the e-coat would have to be intentional in a professional’s hands.