Induction Heating Tools

Extinguish the Flame

Inductor^® Series Attachment: Concentrator^®

Remove the Most Stubborn Nuts, Bolts, Seam Sealers, & Fix Soft Dents

How often have you wasted time, damaging tools and parts trying, in vain, to loosen seized nuts, bolts and other fasteners either with or without a torch? How long does it take you to fix soft dents without damaging the paint?

The Concentrator attachment allows you to loosen seized hardware from corrosion and thread lock compounds, and more without the danger and collateral damage of an open flame

Concentrator Features & Benefits

Concentrates the high-frequency magnetic field and energy into a smaller area for more intense precision heating
Capable of heating hardware to 1400F in seconds
Removal of seam sealers in a fraction of the time
Expose hardware and welds buried in body coatings
Remove or minimize soft hail dent repair (practice required)
Metal shrinking and fabrication

U-Series Concentrator Attachment (U-411)

Features

Molded in impact resistant polymers for durability
Beveled edges for better access to the work load
Used on Inductor Max and Pro-Max only
Comes standard with the Inductor Pro-Max
Activated by the foot pedal on the power supply (power supply not included)

Specifications

6′ HF Cord to power supply
Work coil dimensions (attachment head: 2.75″ x 1.2″ x 2.6″
Weight: 1.4 lbs.

Purchase the U-411 here

Inductor Lite Concentrator Attachment (IL-411)

Features

Molded in impact resistant polymers for durability
Used on Inductor Lite only. (It will not work on the Inductor Max or Pro-Max)
Activated by the foot pedal on the power supply or the button on the attachment (power supply not included)

Specifications

7.5′ HF Cord to power supply
Work coil dimensions (attachment head); 3.2″ x 1.5″ x 2.5″
Weight: 2.0 lbs.

Purchase the IL-411 here

Accessories

Purchase accessories, custom and replacement attachments like the Rosebud, the L-Wedge, and thermal tape.

See All

Models

Learn More

Demos & Videos

See the Inductor Series in action by mechanics and auto body shops.

Testimonials

So far this tool has been one of those tools you must have. I used it to remove fuel tank strap nuts that were rusted, I was very surprised how quickly the nuts heat up. I had to rotate a lever on a shaft that was frozen in a tight area surrounded by fiberglass. I was able to wrap the coil around the shaft and applied heat, made the job easy. Overall this tool is one that is a must have!
Automotive User, Scottsboro, AL

Ever since repairing two induction bearing heaters for a friend, I have been intrigued with the principle. When the opportunity came up to purchase a Mini-Ductor II with additional coil set at a price I could afford, I went for it, realizing there were specific applications where my torch either could not be used or its proximity to combustibles was not safe to use. Induction heat offers a controlled localized intense heat immune to non-ferrous alloys, glass, paint, plastic, and flammables like gasoline that you just cannot get other ways, making it a reach-for tool in many situations.
Don Anderson

My only wish is that I had this technology decades ago. It is so much safer than a torch and truly minimizes collateral damage. I am an independent semi-retired operator, and I can’t afford many “high ticket” items, but this tool is so practical that I really can’t do without it.
Walter Morgan

This is the single best tool I’ve ever used. I use this on new cars as well. Seat-belt bolts are very tight. I’ll put a T-50 [screw head] on a seat bolt, and I lean on it, and I know I will break it or break my tool. I put the Mini-Ductor over it for two seconds, and then I can break it loose and take it out.
Bob Welker, ASE certified master technician

I just wanted to take a moment to rave about your Mini-Ductor. Working as an automotive technician, in the northeast, this tool is essential for removing rusted fasteners. I have worked in the industry for 30 years. I wish that I had found out about your product sooner. You have a customer for life. Your staff has been incredibly helpful and they really know their stuff.
Jaye Tinnell

After the second time I used the Mini-Ductor II, it paid for itself. Straightening a bent sway bar, on the vehicle, without removing it took 10 minutes. Would have been a one hour repair otherwise. The second time rivets in a ball joint on a 15 year old truck would not come out. Heated them to “cherry red” in less than a minute, and were removed effortlessly. Have been in the auto repair business for 33 years and I wish I would know about it sooner.
Jim B.

Today was the first time I used my Mini-Ductor Venom. I was working on a 14 year old van doing exhaust work. The Venom got all the nuts red hot in seconds and they came off very easily. I like the Venom because I do not have to worry about damaging other components or setting things on fire as you would when working with an acetylene torch in tight places. I would give the Mini-Ductor Venom a solid 5 out of 5.
Ryan Topliffe

Under state guidelines, we are processing orders under limited operations. Learn more >

Induction Heating Tools

Inductor® Series Attachment: Concentrator®

Concentrator Features & Benefits

U-Series Concentrator Attachment (U-411)

Features

Specifications

Inductor Lite Concentrator Attachment (IL-411)

Features

Specifications

Accessories

Models

Demos & Videos

Testimonials

Inductor^® Series Attachment: Concentrator^®