Inductor^® Lite: Concentrator Attachment

Warms and release all types of mechanical parts in a few seconds such as bolts, screws, shock absorbers, track rod ends, etc.

Inductor Lite Concentrator Attachment

The Concentrator for the Inductor Lite is used for intense heating of rusted or stuck parts such as nuts and bolts. When using the Concentrator to loosen stuck nuts and bolts, it is OK to use full power to start with. Other uses include caulking removal from truck beds and trunks of sedans, as well as soldering large electrical connectors and metal forming.

Removing Stuck or Rusted Bolts

The Concentrator is particularly useful in removing stuck or rusted nuts and bolts. It is better than an oxy-acetylene torch in several ways:

It only heats the metal parts positioned within the gap and without flames that can set fire to the many plastic parts in today’s cars, reducing fire hazards
Unlike the torch which tends to heat both the nut and the bolt, the Concentrator can be applied to the nut only, heating it and making it expand more than the bolt and thus easier to break loose
The Concentrator plugs into the Inductor Lite, it is lightweight, portable, and ready for instant use
It is not necessary to heat fasteners to a red color – only mild heat is required to free the seized fastener in most cases

Prolonged exposure of the Concentrator to extreme heat will shorten the life of the inductor and could cause un-warranted damage.

Bending Metallic Parts

The Concentrator can also be used to quickly bend small round or flat steel stock for a lot of applications.

Find a Reseller Download Brochure User Manual

The Inductor Lite is only available through authorized warehouses and jobbers.

Contact us to learn more about the Inductor Lite induction heater

Accessories

Purchase accessories, custom and replacement attachments like the Rosebud, the L-Wedge, and thermal tape.

See All

Models

Learn More

Demos & Videos

See the Inductor Series in action by mechanics and auto body shops.

Testimonial

Great experience. I previously had a Mini-Ductor for a good few years, and found your website to purchase the higher powered Venom-HP model. Mark Friedenauer contacted me via email on a Sunday evening, and I called him a few days later to discuss the products I was interested in. He answered all my questions very professionally and sold me the unit right then. Perfect gentleman! Thanks Mark!
Founder of Gunsmither Tools

After the second time I used the Mini-Ductor II, it paid for itself. Straightening a bent sway bar, on the vehicle, without removing it took 10 minutes. Would have been a one hour repair otherwise. The second time rivets in a ball joint on a 15 year old truck would not come out. Heated them to “cherry red” in less than a minute, and were removed effortlessly. Have been in the auto repair business for 33 years and I wish I would know about it sooner.
Jim B.

I have been working as an auto mechanic for 42 years. I received my Mini-Ductor 2 today. Absolutely amazing tool. Wish I would have had one years ago. I live in an area that has a lot of rust from road salt. I am constantly dealing with seized bolts. This tool will most definitely make my life easier. Thank you, thank you…
Randy Chevrier

I’m using my Mini-Ductor today! It’s so fun and easy, I was upset I didn’t need to use it on all the bolts!
Ken, Master Tech

It’s so fun and easy, I was upset I didn’t need to use it on all the bolts! I’m using my Mini-Ductor today!
Chuck, Master Tech

I just wanted to drop a note to you folks what a GREAT tool the Mini-Ductor II is. We started us the kit with the JEEP trailer hitch recall. The tech were scratching their heads until they put it to work. I would have to say that this is the most used special tool in our shop. We use it bumper to bumper, from steering components, catalytic converters, suspension arms anywhere there are two pieces of metal bolted together. The service has been super ! Great tool, great people to work with, equals happy technicians! Thank you for putting together a great tool package!
Bob Bolinger, Hayes JEEP

Here’s some feedback on the mini-ductor.

I’ve been using the mini-ductor tool for a couple years. I’m a mechanic in the Northwestern part of the US and the vehicles have plenty of rust from the roads treatments in the winter to eliminate ice. It’s very handy to have. I use it pretty regularly on alignments to break loose frozen tie rods. I also use it to break free stuck head bolts. This is a real time saver. It’s literately saved me hundreds of hours. As a flat rate technician saving time is the name of the game. This tool definitely is a time saver. I would have no problem buying another one.

Thank you,
Kyle Northrop

Join Our Mailing List

Hello. Thank you for your interest in the Inductor^® line of products. This email list will keep you up to date with new product releases along with tips on product use. We do not solicit product or share your information from joining this list.

Inductor® Lite: Concentrator Attachment