Induction Heating Tools

Extinguish the Flame

Inductor^® Series: Pro-Max CE

The Pro-Max CE is the highest performance induction heating system on the market

Using high frequency magnetic fields (induction heat), Pro-Max CE generates Invisible Heat^® to remove all types of adhesives bonded to metal, release seized hardware from corrosion or thread lock compounds, all without the collateral damage normally associated with conventional methods such as torches.

The Pro-Max CE is only available through authorized international distributors and other Induction Innovations channel partners.

Find a Reseller

Download Catalog

Manual

Pro-Max CE Benefits

Reduce labor by 75%
Re-use parts normally discarded
Save on consumables
Reduce the need for toxic solvents
Flameless: safer than a torch

Pro-Max CE Features

High performance/energy efficient induction heat inverter that maximizes use of a 220V/20A circuit
Rated: input 2,200W, max output 2,000W
Audible and visual power indicators
Fine tuning linear power control
Pneumatic foot switch (Resilient to dirt and water)
CE marking for user safety
Attachments instantly heat ferrous metals without the collateral damage to nearby plastics
Storage for attachments included

Pro-Max CE Includes

U-Series Concentrator^® (U-411): instantly heats nuts, bolts and all types of hardware red-hot in seconds and removes body caulking, seam sealers and hail dents. Allow user to remove corroded hardware in seconds, and body caulking in minutes leaving a clean surface and spot welds intact
U-Series Glass Blaster^® (U-311): removes bonded glass, SMC panels, metal bond adhesives and spray-on bedliners; windshields can also be removed in less than 15 minutes, while spray-on bedliners in as little as a few hours
U-Series Fast-Off^® Pad (U-211): removes stripes, vinyl graphics, body side moldings, sound pads, vapor barriers, stress relieving sheet metal repairs and more. Literally saves hours on labor plus the added bonus on solvent-free removal as adhesive remains on graphic
(2) L-wedges
Operating manual

Contact us to learn more about the Inductor Pro-Max induction heater

Accessories

Purchase accessories, custom and replacement attachments like the Rosebud, the L-Wedge, and thermal tape.

See All

Models

Learn More

Demos & Videos

See the Inductor Series in action by mechanics and auto body shops.

Testimonials

Great experience. I previously had a Mini-Ductor for a good few years, and found your website to purchase the higher powered Venom-HP model. Mark Friedenauer contacted me via email on a Sunday evening, and I called him a few days later to discuss the products I was interested in. He answered all my questions very professionally and sold me the unit right then. Perfect gentleman! Thanks Mark!
Founder of Gunsmither Tools

So far this tool has been one of those tools you must have. I used it to remove fuel tank strap nuts that were rusted, I was very surprised how quickly the nuts heat up. I had to rotate a lever on a shaft that was frozen in a tight area surrounded by fiberglass. I was able to wrap the coil around the shaft and applied heat, made the job easy. Overall this tool is one that is a must have!
Automotive User, Scottsboro, AL

Ever since repairing two induction bearing heaters for a friend, I have been intrigued with the principle. When the opportunity came up to purchase a Mini-Ductor II with additional coil set at a price I could afford, I went for it, realizing there were specific applications where my torch either could not be used or its proximity to combustibles was not safe to use. Induction heat offers a controlled localized intense heat immune to non-ferrous alloys, glass, paint, plastic, and flammables like gasoline that you just cannot get other ways, making it a reach-for tool in many situations.
Don Anderson

My only wish is that I had this technology decades ago. It is so much safer than a torch and truly minimizes collateral damage. I am an independent semi-retired operator, and I can’t afford many “high ticket” items, but this tool is so practical that I really can’t do without it.
Walter Morgan

This is the single best tool I’ve ever used. I use this on new cars as well. Seat-belt bolts are very tight. I’ll put a T-50 [screw head] on a seat bolt, and I lean on it, and I know I will break it or break my tool. I put the Mini-Ductor over it for two seconds, and then I can break it loose and take it out.
Bob Welker, ASE certified master technician

I just wanted to take a moment to rave about your Mini-Ductor. Working as an automotive technician, in the northeast, this tool is essential for removing rusted fasteners. I have worked in the industry for 30 years. I wish that I had found out about your product sooner. You have a customer for life. Your staff has been incredibly helpful and they really know their stuff.
Jaye Tinnell

After the second time I used the Mini-Ductor II, it paid for itself. Straightening a bent sway bar, on the vehicle, without removing it took 10 minutes. Would have been a one hour repair otherwise. The second time rivets in a ball joint on a 15 year old truck would not come out. Heated them to “cherry red” in less than a minute, and were removed effortlessly. Have been in the auto repair business for 33 years and I wish I would know about it sooner.
Jim B.

Today was the first time I used my Mini-Ductor Venom. I was working on a 14 year old van doing exhaust work. The Venom got all the nuts red hot in seconds and they came off very easily. I like the Venom because I do not have to worry about damaging other components or setting things on fire as you would when working with an acetylene torch in tight places. I would give the Mini-Ductor Venom a solid 5 out of 5.
Ryan Topliffe

Limited Edition Mini-Ductor® Venom® HP: Support Breast Cancer Research with Your PurchaseLearn more >