The Mini-Ductor is the professional’s choice hand held flameless torch. Leverage the power of technology with Invisible Heat®! The flameless solution for releasing corroded or frozen hardware and other metallic components from corrosion and threadlock compounds – all without the collateral damage normally associated with torches. Heats nuts red hot in seconds! Learn more about the different models of the Mini-Ductor below to decide which one fits your needs best.
Experience fast, safe and damage-free removal of stubborn nuts and bolts, exterior trim, vinyl graphics, bonding, glass, and much more.
The Mini-Ductor is the professional’s choice handheld, flameless torch and leverages the power of Invisible Heat® to heat ferrous metals in seconds. Using high frequency magnetic fields, the Mini-Ductor releases corroded or frozen hardware and other metallic components from corrosion and thread lock compounds – all without the collateral damage normally associated with torches.
Using one of the included coils that can flex around corners a flame cannot, the Mini-Ductor heats a 3/4″ nut red hot in seconds.
Without the danger of an open flame, you will be able to heat metallic objects near plastic splash shields or other plastic components without the need to remove or shield them. This saves you time and inconvenience of unnecessary R&I procedures.
Don’t wait until you find that your acetylene torch is empty or that it’s across the shop being used.
The Mini-Ductor is only available through authorized warehouses, jobbers and online resellers.
See the Mini-Ductor Series in action.
Great experience. I previously had a Mini-Ductor for a good few years, and found your website to purchase the higher powered Venom-HP model. Mark Friedenauer contacted me via email on a Sunday evening, and I called him a few days later to discuss the products I was interested in. He answered all my questions very professionally and sold me the unit right then. Perfect gentleman! Thanks Mark!Founder of Gunsmither Tools
After the second time I used the Mini-Ductor II, it paid for itself. Straightening a bent sway bar, on the vehicle, without removing it took 10 minutes. Would have been a one hour repair otherwise. The second time rivets in a ball joint on a 15 year old truck would not come out. Heated them to “cherry red” in less than a minute, and were removed effortlessly. Have been in the auto repair business for 33 years and I wish I would know about it sooner.Jim B.
I have been working as an auto mechanic for 42 years. I received my Mini-Ductor 2 today. Absolutely amazing tool. Wish I would have had one years ago. I live in an area that has a lot of rust from road salt. I am constantly dealing with seized bolts. This tool will most definitely make my life easier. Thank you, thank you…Randy Chevrier
I’m using my Mini-Ductor today! It’s so fun and easy, I was upset I didn’t need to use it on all the bolts!Ken, Master Tech
It’s so fun and easy, I was upset I didn’t need to use it on all the bolts! I’m using my Mini-Ductor today!Chuck, Master Tech
I just wanted to drop a note to you folks what a GREAT tool the Mini-Ductor II is. We started us the kit with the JEEP trailer hitch recall. The tech were scratching their heads until they put it to work. I would have to say that this is the most used special tool in our shop. We use it bumper to bumper, from steering components, catalytic converters, suspension arms anywhere there are two pieces of metal bolted together. The service has been super ! Great tool, great people to work with, equals happy technicians! Thank you for putting together a great tool package!Bob Bolinger, Hayes JEEP
Here’s some feedback on the mini-ductor.
I’ve been using the mini-ductor tool for a couple years. I’m a mechanic in the Northwestern part of the US and the vehicles have plenty of rust from the roads treatments in the winter to eliminate ice. It’s very handy to have. I use it pretty regularly on alignments to break loose frozen tie rods. I also use it to break free stuck head bolts. This is a real time saver. It’s literately saved me hundreds of hours. As a flat rate technician saving time is the name of the game. This tool definitely is a time saver. I would have no problem buying another one.
Thank you,Kyle Northrop
Hello. Thank you for your interest in the Inductor® line of products. This email list will keep you up to date with new product releases along with tips on product use. We do not solicit product or share your information from joining this list.