BR Cartonics – UK Case Study

Comments

• An excellent piece of kit
• Very effective for getting to inaccessible places, for example the bendable coils reach previously inaccessible areas around exhausts
• Good for removing track rod ends, rusted bolts, and suspension arms, exhaust champs, brake pipe unions etc
• Debonding rubber bushes – excellent as heats the metal housing and allows the bush to be pushed out easily in just 15-20 seconds. Normally this job, using traditional naked flame heating takes a long time – makes hard job fairly easy
• The Mini-Ductor allows us to do things in situ – no need for major dismantling to get to inaccessible areas so saves huge amounts of time
• Flame reduction and smoke reduction – flames set fire to rubber so we often have noxious rubber fumes and the workshop can be full of smoke! We won’t have this problem by using the Mini-Ductor
• Tough, powerful unit keeps heat localised around bolt – takes 15 seconds to get hot and very efficient way of heating up such parts that need to be removed
• 80% time saving = higher productivity, the customer gets charged less, but profits are increased because productivity is high and there’s almost no Health & Safety worries
• Can release track rod ends without having to replace the ball joint – previously this was a big job but the Mini-Ductor makes it relatively easy
• Also good for forming metal

Thoughts on Other Possible Uses

• On site hydraulic hoses on tractors
• Braising items onto end cable – no need for flame
• Re soldering of battery terminals
• Bearing houses – to heat these up is important

Contact us to learn more or for more information

[email protected]