Inductor^® Series: Pro-Max CE Fully Loaded

The Highest Performance Induction Heating System on the Market

Using high frequency magnetic fields, the Inductor Pro-Max CE Fully Loaded utilizes Invisible Heat^® to easily remove parts bonded to metal. In seconds, you will be able to release seized hardware from corrosion or thread lock compounds and other adhesives without the collateral damage and safety risks of an open oxy-acetylene flame.

Find a Reseller

Download Catalog

Manual

Pro-Max CE Benefits

Reduce labor by as much as 75%
Save, re-use and salvage parts usually discarded
Save on the need for toxic solvents
Reduce the need for expensive consumables
Invisible Heat is safer than a torch

Pro-Max CE Features

High performance/energy efficient induction heat inverter that maximizes use of a 220V/20A circuit
Rated: input 2,200W, max output 2,000W
Audible and visual power indicators
Fine tuning linear power control
Pneumatic foot switch (Resilient to dirt and water)
CE marking earned for user safety
Attachments instantly heat ferrous metals without the collateral damage to nearby plastics
Storage for attachments included

Pro-Max Fully Loaded Includes

The Pro-Max Fully Loaded is our Pro-Max induction heating system with the following ergonomically designed attachments, some molded in high temp, impact and chemical resistant epoxy polymers:

U-555: with a design similar to the Mini-Ductor^® but offering 40% more power, the U-555 leverages the power of the Pro-Max to instantly heat metallic objects, nuts/bolts, bearings, gears, pulleys, O² sensors and more with an ergonomically slip-resistant, hand grenade style grip, and a super bright LED (coil kits are included)
U-Series Rosebud (U-511): designed for the heavy duty needs of auto body professionals, used to heat frame rails, anneal aluminum panels for stress relieving, and heavy gauge steel heating
U-Series Concentrator^® (U-411): instantly heats nuts, bolts and all types of hardware red-hot in seconds and removes body caulking, seam sealers and hail dents. Allows users to remove corroded hardware in seconds, and body caulking in minutes leaving a clean surface and spot welds intact

U-Series Glass Blaster^® (U-311): removes bonded glass, SMC panels, metal bond adhesives and spray-on bedliners; windscreens can also be removed in less than 15 minutes, while spray-on bedliners in as little as a few hours
U-Series Fast-Off^® Pad (U-211): removes stripes, vinyl graphics, body side moldings, sound pads, vapor barriers, stress relieving sheet metal repairs and more; literally saves hours on labor plus the added bonus on solvent-free removal as adhesive remains on graphic
U-Series PDR Baton (U-111): unlike traditional PDR, induction heating is the cleanest and fastest way for fixing hail dents, door dings and other minor soft dents
Heavy-Duty, custom Designed Cart: made of 22 gauge steel and powder coat finish to withstand the rigors of a body shop, can handle up to 300 lbs. and is covered by a lifetime warranty

Offering so much more than simple precise flameless heat, the Pro-Max CE Fully Loaded is the auto pro’s new best friend, saving many hours in labor and adding positivity to the bottom line.

Contact us to learn more about the Inductor Pro-Max CE Fully Loaded induction heater

Accessories

Purchase accessories, custom and replacement attachments like the Rosebud, the L-Wedge, and thermal tape.

See All

Models

Learn More

Demos & Videos

See the Inductor Series in action by mechanics and auto body shops.

Testimonials

I just purchased the venom HP. It is quickly becoming one of my favorite tools in my garage! I don’t know how I’ve worked all these years with out it! I work on a lot of old rusty trucks that have spent years sitting in fields or barns. The venom hp makes working on them so much easier! It’s so much safer than using torches! You have a customer for life! Thanks!

Matt Studebaker

Great experience. I previously had a Mini-Ductor for a good few years, and found your website to purchase the higher powered Venom-HP model. Mark Friedenauer contacted me via email on a Sunday evening, and I called him a few days later to discuss the products I was interested in. He answered all my questions very professionally and sold me the unit right then. Perfect gentleman! Thanks Mark!
Founder of Gunsmither Tools

So far this tool has been one of those tools you must have. I used it to remove fuel tank strap nuts that were rusted, I was very surprised how quickly the nuts heat up. I had to rotate a lever on a shaft that was frozen in a tight area surrounded by fiberglass. I was able to wrap the coil around the shaft and applied heat, made the job easy. Overall this tool is one that is a must have!
Automotive User, Scottsboro, AL

Ever since repairing two induction bearing heaters for a friend, I have been intrigued with the principle. When the opportunity came up to purchase a Mini-Ductor II with additional coil set at a price I could afford, I went for it, realizing there were specific applications where my torch either could not be used or its proximity to combustibles was not safe to use. Induction heat offers a controlled localized intense heat immune to non-ferrous alloys, glass, paint, plastic, and flammables like gasoline that you just cannot get other ways, making it a reach-for tool in many situations.
Don Anderson

My only wish is that I had this technology decades ago. It is so much safer than a torch and truly minimizes collateral damage. I am an independent semi-retired operator, and I can’t afford many “high ticket” items, but this tool is so practical that I really can’t do without it.
Walter Morgan

This is the single best tool I’ve ever used. I use this on new cars as well. Seat-belt bolts are very tight. I’ll put a T-50 [screw head] on a seat bolt, and I lean on it, and I know I will break it or break my tool. I put the Mini-Ductor over it for two seconds, and then I can break it loose and take it out.
Bob Welker, ASE certified master technician

I just wanted to take a moment to rave about your Mini-Ductor. Working as an automotive technician, in the northeast, this tool is essential for removing rusted fasteners. I have worked in the industry for 30 years. I wish that I had found out about your product sooner. You have a customer for life. Your staff has been incredibly helpful and they really know their stuff.
Jaye Tinnell

After the second time I used the Mini-Ductor II, it paid for itself. Straightening a bent sway bar, on the vehicle, without removing it took 10 minutes. Would have been a one hour repair otherwise. The second time rivets in a ball joint on a 15 year old truck would not come out. Heated them to “cherry red” in less than a minute, and were removed effortlessly. Have been in the auto repair business for 33 years and I wish I would know about it sooner.
Jim B.

Today was the first time I used my Mini-Ductor Venom. I was working on a 14 year old van doing exhaust work. The Venom got all the nuts red hot in seconds and they came off very easily. I like the Venom because I do not have to worry about damaging other components or setting things on fire as you would when working with an acetylene torch in tight places. I would give the Mini-Ductor Venom a solid 5 out of 5.
Ryan Topliffe

Join Our Mailing List

Hello. Thank you for your interest in the Inductor^® line of products. This email list will keep you up to date with new product releases along with tips on product use. We do not solicit product or share your information from joining this list.

Inductor® Series: Pro-Max CE Fully Loaded