SEMA Show Specials, Thin Wall Coils & Exhaust Manifold Bolt Removal

Recessed Lug Nut Removal with Thin Wall Coils

Do you need to remove recessed lug nuts that you can’t remove with a lug wrench and breaker bar?

Higher quality and custom wheels often use recessed lug nuts where the space between the nut and the wheel is pretty tight, making it hard to get a normal sized induction heating coil in there. Now you can now get in there with our thin wall coil to apply induction heat. The thin wall coil is an optional accessory for use with any Mini-Ductor model.

Exhaust Manifold Bolt Removal

Removing exhaust bolts no longer has to be a lengthy, difficult and frustrating task for mechanics. The Mini-Ductor Venom^® uses induction heating to remove adhesives, thread lock and seized hardware faster and more safely than using a torch – and you won’t damage nearby parts.

Windshield & Glass Removal in Minutes

The Glass Blaster removes windshields from outside the vehicle in less than 15 minutes with no need to remove the interior trim because it releases urethane in hard-to-reach areas (curves and deep pockets) where other glass tools can’t go. There is no damage to the encapsulant or frit (blackout masking). Quarter glass can be removed in less than 3 minutes. Spray-in bedliners can be removed in just a few hours.

Contact us to learn more about the Mini-Ductor Venom portable induction heater

Photos from SEMA 2018