Menu

Induction Heating Tools

Extinguish the Flame

SEMA Show Specials, Thin Wall Coils & Exhaust Manifold Bolt Removal

Alicia Hawkins - Tuesday, November 13, 2018

SEMA Show Specials

Take advantage of our show specials and see how to remove recessed lug nuts and exhaust manifold bolts faster than a torch.

SEMA 2018 Show Specials

We are extending the following through December 31, 2018:

To take advantage of these offers, call us at (877) 688-9633.

Recessed Lug Nut Removal with Thin Wall Coils

Recessed Lug Nut Removal with Thin Wall Coils

Do you need to remove recessed lug nuts that you can't remove with a lug wrench and breaker bar?

Higher quality and custom wheels often use recessed lug nuts where the space between the nut and the wheel is pretty tight, making it hard to get a normal sized induction heating coil in there. Now you can now get in there with our thin wall coil to apply induction heat. The thin wall coil is an optional accessory for use with any Mini-Ductor model.

Exhaust Manifold Bolt Removal

Removing exhaust bolts no longer has to be a lengthy, difficult and frustrating task for mechanics. The Mini-Ductor Venom® uses induction heating to remove adhesives, thread lock and seized hardware faster and more safely than using a torch – and you won't damage nearby parts.

Windshield & Glass Removal in Minutes

The Glass Blaster removes windshields from outside the vehicle in less than 15 minutes with no need to remove the interior trim because it releases urethane in hard-to-reach areas (curves and deep pockets) where other glass tools can't go. There is no damage to the encapsulant or frit (blackout masking). Quarter glass can be removed in less than 3 minutes. Spray-in bedliners can be removed in just a few hours.

Contact us to learn more about the Mini-Ductor Venom portable induction heater

Photos from SEMA 2018

Induction Innovations SEMA 2018 1

Induction Innovations SEMA 2018 2

Induction Innovations SEMA 2018 3

Induction Innovations SEMA 2018 4


Induction Innovations, Inc.

U.S. patents: 6670590 and 6563096 apply to all products; D707,804 and D728,086 apply to handheld, inline induction heaters; patent pending for the Mini-Ductor 12V (MD-500)
European Patent Office (EPO): patent 002076372-0001 applies to all handheld, inline induction heaters; patent pending for the Mini-Ductor 220V (MD-800) and Mini-Ductor 12V (MD-500)
Australia patent: 343968 applies to all handheld, inline induction heaters