Menu

Induction Heating Tools

Extinguish the Flame

Induction Does More Than Automotive Repairs

Friday, May 31, 2019

Induction Does More Than Automotive Repairs

After our president and CEO, Tom Gough, spent 28 years working hands-on in the collision repair business, he recognized the need for a tool that was safer and easier to use than the torches found in most shops. In 2000, he invented the first model of the Inductor® Series, which was born from years of dealing with the many time-consuming processes found in the collision repair industry. Though the Inductor was designed for use on cars, it was apparent early on that this tool could do so much more.

 Read More

SEMA Show Specials, Thin Wall Coils & Exhaust Manifold Bolt Removal

Tuesday, November 13, 2018

SEMA Show Specials

Take advantage of our show specials and see how to remove recessed lug nuts and exhaust manifold bolts faster than a torch.

SEMA 2018 Show Specials

We are extending the following through December 31, 2018:

To take advantage of these offers, call us at (877) 688-9633.

 Read More

How to Extend Induction Heating Coil Life to 200+ Uses

Friday, May 18, 2018

Whether you are involved in automotive, trucking, farming, or other vehicle and equipment repair, here are some tips for how to maximize coil life for your Mini-Ductor® model and the U-555 Mini-Ductor attachment for the Pro-Max and Max models of the Inductor Series®:

  • To avoid overheating and damaging your coils, use the device for two minutes on, two minutes off – on Mini-Ductor models, the inverter will automatically shut off if it overheats
  • Keep space between your coil and the bolt, fastener, bearing, etc. and your coil – the part doesn't need to get red hot; just heat for 5-10 seconds and, if it's difficult to get off, heat for another 5 seconds
  • When using the 41" or 96" Bearing Buddy: use a plumber's mat to avoid abrasion and overheating

Mini-Ductor Coil Replacement

 Read More

How to Extend Bearing Buddy Coil Life

Tuesday, December 19, 2017

Induction Heating Bearing Buddy

While mechanics, bodyshops, truck technicians, and farmers love their Mini-Ductor® Venom® and Mini-Ductor II induction heating tools, their safety and effectiveness are dependent on the state of the pre-formed coils used with them.

The Inductor® coils are vital accessories for technicians and we're often asked by customers for tips and advice on how to extend the life of our coils.

For example, the Bearing Buddy coil (available in both 41" and 96" lengths) is used to free steering and suspension parts, frozen O² sensors, remove ball joints and tie-rod ends. These coils are available in regular or long sizes.

Each coil will last several hundred uses, but avoiding abrasion and overheating, which can breach the insulation, prevents premature wear.

 Read More

See How Induction Heating Solves Repair Problems & Pays for Itself at SEMA 2017

Wednesday, October 18, 2017

See How Induction Heating Solves Repair Problems & Pays for Itself at SEMA 2017

Visit us in booth #11009 in the Collision Section at SEMA 2017 to see how we solve a wide variety of automotive repair issues with induction heating equipment that pays for itself in less than a year (often in 3-6 months).

Repair issues include releasing seized/corroded parts, repair dents and removing glass without having to sub-contract it out, with the PTEN award-winning Mini-Ductor Venom portable induction heater and Inductor® Lite 2,400W induction heater.

Mini-Ductor Venom

Induction Innovations Mini-Ductor Venom

Venom is the third generation of the legendary Mini-Ductor handheld induction heater and has won a PTEN Innovation Award.

Venom generates Invisible Heat® to release ferrous and some non-ferrous metals from corrosion and thread lock compounds without the dangers of open flame and up to 90% faster – 3/4" nuts are turned red hot in seconds.

Learn more about Venom...

2017 SEMA Mini-Ductor Show Specials

 Read More

Learn How to Reduce Cycle Time with Induction Heating at NACE Automechanika 2017

Monday, July 24, 2017

Learn How to Reduce Cycle Time with Induction Heating at NACE Automechanika 2017

Visit Induction Innovations to see a demo of the Glass Blaster® and Inductor® Pro-Max induction heaters, and learn how they decrease cycle time for removal of glass and seized metal parts.

Questions for Body Shop Owners

What if you could remove glass quickly and without having to sub-contract it out?

What if you could remove nuts, bolts, fasteners, and other seized parts in a fraction of the time it takes today, and without causing collateral damage?

Would you like to see a tool that does this and pays for itself after a few uses by decreasing your cycle time?

Get Answers in Booth #1809

 Read More

Which Induction Heater Do I Need?

Monday, June 26, 2017

What Induction Heater Do I Need?

Induction heaters use magnetic flux to quickly heat ferrous metal and some aluminum parts, but which one is right for your application?

Our portable induction heater, the Mini-Ductor® Venom™, uses 1,000 watts of power, so when do you need 2,000 watts of power provided by the Inductor® Series?

To answer these questions, we've developed this handy guide to give you clarity.

Induction Heating Applications

The entire line of induction heaters from Induction Innovations® is ideal for removing parts that are corroded, rusted on, stuck on with adhesives or threadlock compound, or are otherwise seized. Some examples:

 Read More


Induction Innovations, Inc.

U.S. patents: 10,349,470, 6670590 and 6563096 apply to all products; D841,788, D707,804 and D728,086 apply to handheld, inline induction heaters;
European Patent Office (EPO): patent 002076372-0001 applies to all handheld, inline induction heaters