Menu

Induction Heating Tools

Extinguish the Flame

Removing Tough Steering Bolts

Thursday, July 23, 2015

How to Use a Heat Induction Tool to Remove Tricky Components

This article appeared in the July/August issue of Professional Motor Mechanic.

Removing Steering Bolts with the Mini-Ductor Induction Heating ToolRemoving rusted, corroded or locked steering bolts is often a lengthy, difficult and frustrating task, especially if you're using a ratchet wrench. It usually requires the application of penetrating fluid, or blasting the area with a torch. This can be very time-consuming, cause unwanted damage and potentially risk your safety.

Help is at hand, however, as the Mini-Ductor® II+ (MD-800P) handheld induction heating tool heats metal parts in seconds, allowing all types of adhesives bonded to metal, fasteners bonded with threadlock compound, and seized hardware to be removed and released much quicker and safer than by traditional naked flame heating.

 Read More

New Mini-Ductor Demo Videos Available

Monday, December 01, 2014

New Mini-Ductor Demo Videos AvailableThe Mini-Ductor uses induction heating to heat metal parts in seconds. This allows all types of adhesives bonded to metal, fasteners bonded with thread lock compound, and seized hardware, to be removed and released much quicker and safer than by traditional naked flame heating. Read More


Induction Innovations, Inc.

U.S. patents: 10,349,470, 6670590 and 6563096 apply to all products; D841,788, D707,804 and D728,086 apply to handheld, inline induction heaters;
European Patent Office (EPO): patent 002076372-0001 applies to all handheld, inline induction heaters