Induction Heating Tools

Extinguish the Flame

Inductor^® Lite Series

The Inductor Lite is a compact and powerful 2,400W induction heater with a digital interface for manual heat control.

Using high frequency magnetic fields, the Inductor Lite utilizes Invisible Heat^® to easily remove parts bonded to metal, including adhesives, logos, side moldings, direct glazed windows, stone guard protection, sealers, mechanical parts, and dents.

In seconds, you will be able to release seized hardware from corrosion or thread lock compounds and other adhesives without the collateral damage and safety risks of an open flame.

Shop Now Find a Reseller Download Brochure Videos

Digital Interface

Inductor Lite Digital Interface

Digital display
Adjustment keys
Thermal protection
Mode selection key
Power heating indicator
Selected mode

Inductor Lite Benefits

Reduce labor by as much as 75%
Save, re-use and salvage parts usually discarded
Save on the need for toxic solvents
Reduce the need for expensive consumables
Invisible Heat is safer than a torch
85V to 265V power supply offers flexible voltage
Auto and manual heating modes
Multi-language user manual

Inductor Lite Includes

Note: Inductor Lite attachments are not compatible with any other Inductor Series model.

Auto Mode: Inductor Lite only starts if the metal is ferrous (not suitable for aluminum or copper) and then automatically adjusts heating to avoid damaging auto parts due to overheating
Manual Mode: Auto Mode can be bypassed when a higher or lower percentage of power is needed (from 0 to 100% with foot pedal control)
Fast-Off Pad Attachment: quickly and easily removes all adhesives and strips as well as side moldings in a few minutes without any damage
Glass Blaster Attachment: peels off welded metal sheets and burns off stone guard protection with the heated scraper; it’s also suitable to remove glass (windshield, rear window, rear quarter light, sunroof, etc.) and can be activated by a switch on the attachment instead of the foot pedal
Concentrator Attachment: warms and releases all types of mechanical parts in a few seconds such as bolts, screws, shock absorbers, track rod ends, etc.
Plastic Wedge Accessory: as a supplement to the other Inductor Lite accessories, the scrapers are essential to remove logos/badges and stone chip protection, etc.

Optional Accessories

Cart & Cable Support: a metal trolley with a cable hanger on the site to manage all cords and accessories
PDR Baton Attachment: fixes hail dents, door dings and other minor soft dents, and can be activated by a switch on the attachment instead of the foot pedal

Contact us to learn more about the Inductor Lite induction heater

Accessories

Purchase accessories, custom and replacement attachments like the Rosebud, the L-Wedge, and thermal tape.

See All

Models

Learn More

Demos & Videos

See the Inductor Series in action by mechanics and auto body shops.

Testimonials

So far this tool has been one of those tools you must have. I used it to remove fuel tank strap nuts that were rusted, I was very surprised how quickly the nuts heat up. I had to rotate a lever on a shaft that was frozen in a tight area surrounded by fiberglass. I was able to wrap the coil around the shaft and applied heat, made the job easy. Overall this tool is one that is a must have!
Automotive User, Scottsboro, AL

Ever since repairing two induction bearing heaters for a friend, I have been intrigued with the principle. When the opportunity came up to purchase a Mini-Ductor II with additional coil set at a price I could afford, I went for it, realizing there were specific applications where my torch either could not be used or its proximity to combustibles was not safe to use. Induction heat offers a controlled localized intense heat immune to non-ferrous alloys, glass, paint, plastic, and flammables like gasoline that you just cannot get other ways, making it a reach-for tool in many situations.
Don Anderson

My only wish is that I had this technology decades ago. It is so much safer than a torch and truly minimizes collateral damage. I am an independent semi-retired operator, and I can’t afford many “high ticket” items, but this tool is so practical that I really can’t do without it.
Walter Morgan

This is the single best tool I’ve ever used. I use this on new cars as well. Seat-belt bolts are very tight. I’ll put a T-50 [screw head] on a seat bolt, and I lean on it, and I know I will break it or break my tool. I put the Mini-Ductor over it for two seconds, and then I can break it loose and take it out.
Bob Welker, ASE certified master technician

I just wanted to take a moment to rave about your Mini-Ductor. Working as an automotive technician, in the northeast, this tool is essential for removing rusted fasteners. I have worked in the industry for 30 years. I wish that I had found out about your product sooner. You have a customer for life. Your staff has been incredibly helpful and they really know their stuff.
Jaye Tinnell

After the second time I used the Mini-Ductor II, it paid for itself. Straightening a bent sway bar, on the vehicle, without removing it took 10 minutes. Would have been a one hour repair otherwise. The second time rivets in a ball joint on a 15 year old truck would not come out. Heated them to “cherry red” in less than a minute, and were removed effortlessly. Have been in the auto repair business for 33 years and I wish I would know about it sooner.
Jim B.

Today was the first time I used my Mini-Ductor Venom. I was working on a 14 year old van doing exhaust work. The Venom got all the nuts red hot in seconds and they came off very easily. I like the Venom because I do not have to worry about damaging other components or setting things on fire as you would when working with an acetylene torch in tight places. I would give the Mini-Ductor Venom a solid 5 out of 5.
Ryan Topliffe

Under state guidelines, we are processing orders under limited operations. Learn more >